A Fool-Proof Method for Conserving Art Projects in the Shipping Process

If you are one among those experienced professionals in the art business, you may not need lessons for packaging your artwork for shipping. However, it could be important for you to consider the material you are using to protect your delicate art work.

Foam board
There is a huge variety of substrates available in the market nowadays and you do need to explore the various packaging options to ensure you select the best one. After all, it is about ensuring that your original and often irreplaceable artworks get to their buyer in one piece. 

Looking into the critical aspects of packaging, foam boards are ideal for this purpose. They are robust, relatively inexpensive, yet very protective of your fragile art work and will therefore, go a long way in ensuring that it’s well preserved until delivered.

A strong support is particularly necessary for safe packaging and storage of artworks that are flat in shape and structure. The best part about foam boards is that they are usually available in different degrees of thickness. So you can simply choose the one that suits you depending on the amount of protection needed for your work.

Foam boards can typically be purchased individually or in bulk. It is recommended that boards that have at least half an inch of thickness be used for flat artworks. Framed works and jewelry, for instance, need a bit of extra care for which packaging with these boards serves the purpose best without taking a lot of time. All you need to do is place your artwork in between two cut out pieces of the board. You may also want to add an additional layer to make the padding squishier. After that, you can use plastic corners in order to seal the angles and tape your artwork. Once your artwork is sandwiched neatly, you can rest assured that your piece will remain safe! In addition, for picture frames, foam boards can also serve as the perfect way of mounting the artwork inside.

A great option for conservation framing is acid-free standard foam board. This foam board provides an acid-free barrier between mounting board and artwork. They have the same memory and rigidity as standard foam board with memory.

Packaging using foam board

No matter how good you are at your art projects, you still need to pay due attention to the packaging of your work as it also represents your professionalism and experience to the buyer. At the same time, the material you use will assure the safety of your projects and prevent any unwanted cracks and breakages.
Using foam boards for packaging will not only create a lasting impression on the mind of your customer, but would also rule out any possibility of your project getting spoiled before your buyer gets a chance to enjoy your masterpiece. 

A Guide to Using Self-Adhesive Foam Board

Foam boards have been meeting our indoor and outdoor requirements for years now and gradually, the industry has begun producing products with specific attributes to address the needs of today’s users. The sturdy and lightweight material that people know as foam board is a popular substrate. 

self adhesive foamboard

It is widely used for a variety of purposes of both domestic and commercial uses. One favorable attribute is that it cuts easily with a good craft knife or a sharp utility knife or simply with a snap off blade.  The substrate has become the backbone of various other industries where it is used.

Self-Adhesive Foam Board - Uses


Foam board is a framer’s choice for mounting of photographs and prints in picture frames. Self-adhesive foam board is the perfect choice when cold mounting photos and artwork on to foam board. This foam board features acid-free adhesive and is chemically inert. This foam board can be supplied as 1 or 2 sided pressure sensitive. It fits the desired shape with grace and can be put to use for interior design and architectural models. Foam boards ideally have three layers, one of which is polystyrene foam garbed with an exterior facing on each side of a paper coated with white clay coated paper. For its application for the purpose of picture framing, it is recommended that acid-free boards are used as they have a relatively longer shelf life and do not percolate acids ahead into the artworks.

SEE ALSO: Why Use Foam Board for Advertising and Displays

Self-Adhesive - Mounting Instructions


It is suggested that you peel the liner sheet on the board a couple of inches back. On doing so, you will be able to see the revealed adhesive. Next, carefully align the top along with the sides of the image print onto the board. After successfully aligning it, place the print down from the top edge.  While you are doing this, make sure that you keep applying the pressure down on the print and at the same time, keep pushing out the air bubbles toward the sides as well as the bottom. After you have the initial one or two inches down, carefully peel a little more release liner backwards and then apply the print in the same manner. You have to apply pressure and let the trapped air slip. Continue to do that all the way down through the entire sheet.

pressure sensitive foam board

If you find small air bubbles along the way or after you are done, simply use a pin and poke a hole right in the centre of the sheet. This should remove any remaining small bubbles that are left. If you are working on a large print, it would be of great help to have someone else there who can hold it for you above the sheet as you peel back the release liner and apply the print. This is to ensure that you don’t get the print hitting the adhesive before you are prepared to apply it.

3 Easy Ways to Mount and Frame your Pictures

Many of us often get fascinated by beautiful artworks, posters or prints and feel the urge to frame them for our home d├ęcor. However, what happens to be the case even more frequently is that we buy those beautiful pieces only to find them stacked in cupboards for months together collecting nothing but dust. Well, no longer do you need to sit back and watch your collection of artworks getting spoiled. You can very well take the charge yourself and get those lovely prints, posters, paintings, and photos out of storage and onto your walls! Here are three quick and easy techniques to use in order to display your favorite artwork on the walls of your home. 

Mounting Photos on Foam Board

1.  Use an Adhesive Mount Board

Mounting and framing pictures and artworks is one of the things for which mounting board comes in quite handy.  Once you have purchased the board of required thickness, cut it to your required size. You should use a good utility knife with a snap off blade for cutting the board as it will help you get a smooth piece to work with. After that, gently peel back the adhesive liner a couple of inches and slowly place your print onto the exposed adhesive.  As you apply pressure to your print always press in one direction removing any air bubbles as you go.  Pull up the release liner a little more and continue to apply the your artwork to the board. The bit of black or white board background to your picture will not overshadow your artwork or the design of your room.

2. Mount Images to Foam Board

For those of you who are not yet exposed to the marvels of the unique fabric called foam board, it’s time you experienced the joy of working with them. They are light-weight, durable and cost-effective substrates used for a variety of purposes. Foam board is slightly thicker than adhesive mounting board and beside a slef-adhesivefoamboard you can use spray mount, double-sided tape or a specific type of glue to position your artwork onto the board. In order to bind your images to foam board in the best possible way, it is recommended that you use a foam boardcutter to cut it neatly. A good utility knife with a snap off blade will leave the edges smooth enough especially if the foam board used is thicker in size. Using the cutter and a good straight edge that protects your fingers, cut the board to the required size and attach your image to it. Foam boards are also available with a self-adhesive peel which are very convenient to use for such projects. To display the foam board-mounted artwork on your wall, get a simple or custom made shelf installed and simply lean the foam board-mounted images against the wall on the shelf.

3. Employ a Photo Mat

These mats are great for photographs as well as prints and are available in standard frame sizes. Often, single and double mats cut to standard specifications are offered by mat board retailers. This is a low cost option that gives your framed pieces a professional appearance and appeal.

Out of all the options listed above, using foam boards for your picture mounting and framing purposes always produces the best results. 

Foamboardsource.com is the online store providing the largest supply of foam boards of various sizes, thicknesses and colors. If you are considering foam boards for any of your projects, contact us on 1-631-491-0364.