A Guide for Self-Adhesive Foam Board

Foamboard has been implementing our personal and domestic requirements for years and over time, this industry has begun producing products with exclusive characteristics to meet the project needs of today’s crafters. This sturdy and lightweight material is a popular substrate liked by users of all ages. It has several exceptional features, including a long-lasting nature, durability, lightweight and many others. All these characteristics make it a sought-after product. 


Foamboard comes in different types, including presentation, Gatorfoam, self-adhesive, Sintra PVC, acrylic, Rynoboard, and more. Each of these boards has unique characteristics and applications. Sintra PVC is best for outdoor purposes, and you can make a door hanger out of it. A prime attribute of this versatile material is that it can be easily shaped with the right cutting tool. You can get the desired shapes and even edges! If you want to learn about self-adhesive boards, this article will help. So, let’s get started!

Uses of Self-Adhesive Foamboard 

Foamboard can be used for mounting photographs and prints in picture frames. Self-adhesive is an ideal choice when cold-mounting photos and artwork to the board. It features an acid-free adhesive that is chemically inert. You can get the self-adhesive type with either one or two-sided pressure-sensitive. It can easily be cut into the desired shape and put to use for interior design and architectural models. It has three layers, the inner is polystyrene sandwiched between white clay-coated paper. It can be used for picture framing because it has a long shelf life and does not absorb acids into the artwork.

Mounting Instructions for Self-Adhesive

Peel the liner sheet on the board to reveal the uncovered adhesive. Next, precisely adjust the placement of your picture or print, and holding it by the sides, press it onto the foamboard. Exert pressure to push out any air, smoothing it toward the sides and base. Now, slowly do the same for the entire sheet. 

See Also: What Makes Foamboard a Preferred Choice of Crafters?

If you find small air bubbles along the way or after you are done, you can simply use a pin and poke a hole to remove them. For a large print, it is best to get help from someone who could hold it for you above the sheet as you peel back the release liner and apply the print. This will ensure that you do not get any adhesive on the print before you are prepared to apply it.

Final words

This is a simple guide for using self-adhesive boards. Now you are ready to use them extensively for a myriad of projects. You can get quality and affordable foamboard and other products at www.foamboardsource.com. We never compromise with the quality of our products and are known to deliver the best products at cost-effective prices.

No comments:

Post a Comment